Led Status Indicator And Smart Button Operation - Digital Check TellerScan TS500 User Manual

LED Status Indicator and Smart Button Operation

Off or No LED: Press Smart Button once to turn on.
Note: To turn off, press and hold the Smart Button.
Solid Red LED: Scanner is not connected to computer. Check and reinsert both ends of the USB cable
connecting to the PC and into the scanner, and verify that the PC is turned on.
Slowly Flashing Green LED: Scanner is in standby mode. This is the default state when an application is not
controlling the scanner or has not yet acquired the scanner.
Solid Green LED: The scanning application has successfully acquired the scanner and is ready to be used.
Solid Orange LED: An item is in the entry pocket and waiting for the scanning process to begin.
TellerScan TS500 User Manual
®
Rev 111618
Smart Button
Clean LED
Status LED
Page | 12