Table of Contents
Advertisement
SmartSource Elite Series - Installation & Operations Guide
Section 2
Operating the Unit
Powering on the Unit
Press the power button. The blue status light within the button will light. When the unit is ready for use,
the light will start to blink slowly.
DO NOT VIEW THE LIGHT SOURCE DIRECTLY WITH OPTICAL
Using the power/start-stop button, and the meaning of the status light
The power/start-stop button has various functions when the machine is working. The blue status light
within the button tells you the condition of the machine. Note that the exact sequence of operation and the
use of the start-stop button may be configured by your application and some uses may be disabled or
unused. Consult with your application provider for exact details.
Function
Operation of button
Power on
Press and hold the button for more than 2 seconds
Power off
Press and hold the button for more than 5 seconds
Start document flow
Press the button for less than 1 second
Stop document flow
Press the button for less than 1 second
Clear document
Press the button for more than 1 second and less
from track –
than 5 seconds, then release the button. The track
'SmartClear'
will start and eject the stopped document, then stop.
function
Varies depending upon application – refer to IT or
Processing
exception during
application provider
document flow
January 2017
Ultraviolet Elite only:
WARNING
INVISIBLE LED RADIATION
INSTRUMENTS.
CLASS 1M LED PRODUCT
8227 4907-003
Status light condition
Turns on continuously until the unit
is ready, then blinks slowly
Blinks slowly, then more quickly,
then turns off
Stops blinking slowly and stays on
continuously
Starts blinking slowly
After 1 second, light will blink more
quickly to show that 'SmartClear'
function has been selected.
Light blinks quickly until exception
is cleared
Page 12 of 32
Hide quick links:
Advertisement
Table of Contents
