Status Info - wtw NiCaVis 705 IQ TS Operating Manual

NiCaVis 705 IQ TS

Status info,

general structure
Status-Info
NiCaVis 705 IQ TS
ba77189e01 05/2017
9.2 Status info
The status info is a coded piece of information on the current status of a sensor.
Each sensor sends this status info to the controller. The status info of sensors
consists of 32 bits, each of which can have the value 0 or 1.
0 1 2 3 4 5 6 7
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
16 17 18 19 20 21 22 23
The bits 0 - 15 are reserved for general information.
The bits 16 - 21 are reserved for internal service information.
You obtain the status info:
 via a manual query in the
nents
menu (see system operating manual)
 by an automated query
– from a superordinate process control (e. g. when connected to the Profi-
bus)
– of the IQ Data Server (see operating manual of the IQ S
ware pack)
The evaluation of the status info, e.g. in the case of an automated
query, has to be made individually for each bit.
Status bit Explanation
Component hardware defective
Bit 0
Component hardware defective
Bit 1
Optical measuring range exceeded
Bit 2
Bit 3-31 -
8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
24 25 26 27 28 29 30 31
Einstellungen/Settings
(general)
(internal)
Service List of all compo
/ /
ENSOR
xxx
Indexes
-
N soft-
ET
55