Anti-Tailgate, Open Commands, Guard Station - Viking X-9S Installation Instructions And Safety Information

ACCESSORY CONNECTIONS
Anti-Tailgate, Open Commands & Guard Station
!
TECHNICAL TIP:
For more information regarding accessory connections and terminal
functions, refer to "Appendix (A)" on pages 40-41.
-
+ +
-
+ -
N.O.
COM
"ATG" Anti-Tailgate
This input will stop the
gate when the vehicle
triggers the sensor, then
closes the gate when the
vehicle leaves the sensor,
preventing unauthorized
vehicles from entry.
-
+
COM
N.O.
3 0
N.O.
COM
N.O.
COM
Open Commands
"Exit ", "Fire" and "Strike" input terminals
all provide an open command to the
control board. Any device connected as
shown will open the gate.
Guard Station
!
All three buttons must be a
Normally Open "N.O." type of
switch, and can share the same
common "C" connection to "GND".
VIKING TECHNICAL SUPPORT 1.800.908.0884