Anti-Tail Gate, Open Commands, Guard Station - Viking F-1NX Installation Instructions And Safety Information

!
Cable use in Class 2 circuit to an external device shall be type CL2, CL2P, CL2R, CL2X or
other cable with equivalent or better electrical, mechanical, and fl ammability ratings.
Anti-Tailgate, Open Commands & Guard Station
!
TECHNICAL TIP:
For more information regarding accessory connections and terminal
functions, refer to "Appendix (A)" on pages 42-43.
-
+ +
-
+ -
N.O.
COM
"ATG" Anti-Tailgate
This input will stop the
gate when the vehicle
triggers the sensor, then
closes the gate when the
vehicle leaves the sensor,
preventing unauthorized
vehicles from entry.
-
+
COM
N.O.
VIKING TECHNICAL SUPPORT 1.800.908.0884
ACCESSORY CONNECTIONS
N.O.
COM
N.O.
COM
Open Commands
"Exit ", "Fire" and "Strike" input terminals
all provide an open command to the
control board. Any device connected as
shown will open the gate.
Guard Station
!
All three buttons must be a
Normally Open "N.O." type of
switch, and can share the same
common "C" connection to "GND".
3 1