Control Board Setup - Viking X-9S Installation Instructions And Safety Information

Initial Settings
"Speed"
Motor Speed
Increases or decreases the speed of gate
travel.
"Overlap"
Overlap Delay
Delays the gate from opening for the
selected amount of time from 1-6
seconds.
!
For Master/Slave or dual applications,
the Master will delay to open and the
slave will delay to close.
VIKING TECHNICAL SUPPORT 1.800.908.0884

CONTROL BOARD SETUP

"ODS"
Obstruction Detection Sensor
Sets the amount of force required to trip
the inherent obstruction sensor.
Refer to page 27 for more details about
this feature.
"Timer"
Hold Open Timer
Automatically closes the gate after
the selected amount of time from 1-60
seconds.
Turning the dial between "0" and "OFF"
will disable this feature, requiring a close
command to close the gate.
2 5