Initial Settings - Viking X-9S Installation Instructions And Safety Information

CONTROL BOARD SETUP

Initial Settings

NOTE:
Installing a shunt, or jumper, on the pins will activate the feature.
2 6
"Last Open" - Power Failure Option
Opens the gate automatically when the
battery voltage is critically low.
"Pre-Warning"
Initiates two options for
an audio or visual warning, 3 seconds
prior to gate motion, and will continue:
1. Until gate reaches closed limit:
"Magnetic Lock" terminals provide a
contact between "COM" and "N.O.".
2. Until gate reaches either limit:
"AUX. PWR" terminals provide 24VDC.
"Sync"
Used only in conjunction with
the Viking Barrier gate operator model
B-12. Activating this feature allows for
synchronized operation with the B-12
operator. See page 33.
"EXT"
Available for future developments.
VIKING TECHNICAL SUPPORT 1.800.908.0884