Screen Innovations Solo Installation Instructions Manual page 8

START UP
1. Connect the Charger - Solo and Solo Pro are shipped
in sleep mode. Prior to first use, wake the screen
from sleep:
a. Plug the charger into the wall, connecting the
charging cable to the charger and magnetic
charging port on the cassette. The screen will jog
up and down once to signal that the motor is now
awake.
b. In the case that the charger does not wake up the
screen, use a thin tool to depress the motor button
through the small hole just in front of charging
port. The screen will jog once to indicate it is
awake.
Start Up
1a. Connect charger (Preferred)
1b. Depress the Motor button
11 Start Up
thin tool
12