If you need to ship your battery powered Solo or Solo
Pro, the battery needs to be at 30% charge or less to
avoid special shipping paperwork and the package
must have a lithium battery label visible on the
shipping carton. See IATA regulations regarding lithium
batteries for more info.
Storage and Transport
CARE AND MAINTENANCE
DO NOT scrub the screen material. This will
damage the viewing surface.
These screens are designed and engineered to be
virtually maintenance free. There are no user serviceable
parts inside, except for the screen material. The screen
needs to be kept clean - free of dust, dirt, hair, particles,
and any other foreign material. Loose material may
be carefully brushed away with a microfiber cloth.
Smudges and splotches from water soluble dirt may be
removed with a damp microfiber cloth.
The battery for your Solo/ Solo Pro will need to be
recharged when the battery charge level is low. The
motor has a built in low charge indicator. It will flash
red twice every 2 to 3 minutes. This will be seen in the
cassette mail slot on the right end in a darkened room.
It may also be seen through the program pin hole on the
cassette.
19
Care and Maintenance
20