Screen Innovations Solo Installation Instructions Manual page 6

5. Remove the snap-on cover (Item 2) from one of the
supplied quick mounts.
6. Securely screw Item 1 to the wall at one of the
marked locations in the orientation shown.
Item 1
Installation
No. 10
Flathead Screw
7
7. Slide Item 2 over Item 1 until it snaps in place. You
will hear a click.
Item 1
8. Repeat quick mount installation for the second
mount. Place a level on the tops of the both quick
mounts to verify that they are level before
installation. Correct if necessary and securely install
the second bracket.
Installation
Item 2
8