Screen Innovations Solo Installation Instructions Manual page 11

It is preferred to store or transport your Solo or Solo Pro
horizontally. Although it may be stored vertically in a
closet, or out of the way, it should only be transported
horizontally or as near horizontally as possible.
Shock and vibration experienced during transportation
when vertical may shift the screen material and cause
wrinkles. If this occurs, the wrinkles may be removed in
most cases by manually redistributing the material with
the following steps:
1. Bump the bottom of the weight bar up several
times along it.
2. With one hand grab over the center of the weight
bar and hold the material at the bottom of the
screen.
3. With the other hand lightly grab the screen material
around the weight bar. Gently slide your grip toward
the edge of the screen to redistribute the material.
Storage and Transport
4. Repeat the process to move the material from the
center toward the other edge.
5. The wrinkles may not fall out immediately if the
screen has been stored in a wrinkled condition.
6. If after 30 minutes to 1 hour the wrinkles are still
there, use a blow drier on them to help speed up
the process.
DO NOT GET THE SCREEN TOO HOT OR THE
MATERIAL MAY BE PERMANENTLY DAMAGED.
Storage temperature is important, not only for the
battery, but also the screen material. Store it between
0°C and 50°C. Ensure it is a temperature controlled area.
17 Storage and Transport 18