Removing The 3.5-Inch Hdd Cage - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.11.6
Removing the 3.5-inch HDD cage
Remove the 3.5-inch HDD cage from the server by using the following procedure.
1.
See steps 1 to 3 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
To remove the side cover and front bezel, see Chapter 2 (1.3 Removing the Side Cover and 1.4
Removing the Front Bezel).
3.
To remove the hard disk drives installed in the HDD cage, see Chapter 2 (1.11.5 Removing the
3.5-inch hard disk drives).
4.
Disconnect the interface cable and power cable from the backplane installed in the HDD cage.
5.
Disconnect the interface cable from the motherboard or RAID controller.
6.
Remove four screws that attach the HDD cage.
7.
Remove the HDD cage from the server.
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
69
Advertisement
Table of Contents
