NEC Express5800 Series User Manual page 82

Chapter 2 Preparations
1. Installing Internal Optional Devices

About RAID LED cables
The Global HDD LED on the front of the equipment shows the access status of hard disk drives that are
connected to a RAID controller. To display this status, connect the LED cable that comes with the optional
cable K410-444(00).
Connect the LED connector on the motherboard to the connector on the RAID controller.
See the figures below and connect the LED cable to the LED connector of the motherboard.
To the motherboard side
LED connector
Motherboard
RAID Controller N8103-206/207/208/210/211 RAID Controller N8103-205
Black
Black
Red
Red
82
Express5800/T110i User's Guide