Names And Functions Of Parts; Front Of The Server - NEC Express5800 Series User Manual

Chapter 1 General Description
4.

Names and Functions of Parts

The names and the functions of the server's parts are as follows.
4.1

Front of the Server

8
10
11
13
1 POWER Switch
A switch for turning on/off the server. Press once to turn on
the server. POWER LED lights green when it is on. Press it
again to turn off the server. Hold down the switch for four
seconds or more to forcibly turn off the server.
2 DUMP Switch (NMI)
A switch for collecting the memory dump.
Do not press DUMP Switch usually. If DUMP Switch is
pressed, the server stops.
3 BMC RESET Switch
A switch for resetting BMC of this server. Use the switch
only when there is a problem with EXPRESSSCOPE
Engine 3 (BMC).
4 POWER LED (green)
An LED for showing the power status of the server. This
LED lights green when the power is ON.
5 Power Capping LED
An LED for showing the power capping status.
6 STATUS LED1,2 (1:green/2:amber)
An LED for showing the server status. See 4.5 Indicators
for details.
7 Global LED 1, 2 (1:green/2:amber)
An LED for showing the hard disk drive status. See 4.5
Indicators for details.
8 USB Connectors (front)
Connectors for connecting USB interface devices.
22
12
15
7
6
4
9
2
8
1
3
5
6
7
14
13
9 Optical Disk Drive
An optical disk drive for reading a CD/DVD. Either of the
following optional device can be installed.
(Must install following one certainly.)
– DVD-ROM drive
– DVD SuperMULTI drive
– ODD Bay Cover
The drive provides the following: an eject button to eject the
tray; an LED that indicates the drive access; and an eject
hole to eject the tray forcibly.
10 Key Slot
A slot for Bezel Lock Key that is used to lock Front Bezel.
11 Front Bezel
A cover for protecting the front part of the server.
12 Front Door
A door for covering 5.25-inch devices and optical disk drive.
13 Stabilizer
Stabilizers for supporting the server.
14 HDD Bay
Bays for installing hard disk drives.
15 5.25-inch Expansion Bay
Bays for installing backup devices.
Express5800/T110i User's Guide
4. Names and Functions of Parts
7
6
4
2
1
3
5
6
7