Configuration After Installing - NEC Express5800 Series User Manual

Chapter 2 Preparations
7. Face the component side of the card toward the bottom of the server. When the rear panel of the card
is firmly engaged with the spring, firmly press the card into the slot so that the component parts of the
card securely connect to the slot.
8. Close the PCI retention latch until it clicks, indicating
that it is locked.
9. Assemble the server.
10. Turn on the server and confirm that no error messages are displayed in POST.
If an error message is displayed, take notes on the message and ask your sales representative.
1.9.4

Configuration after installing

Depending on the type of card installed, you need to use a utility, such as the BIOS setup utility, a setup
utility provided with the card, following installation to modify server settings.
Follow the instructions in the manual provided with the card to specify the correct settings.
After turning the server power on, the PCI bus numbers are scanned in ascending order. If the option ROM
installed in the card contains a BIOS utility, the startup message (banner) is displayed in ascending order of
the PCI bus numbers.
Important
If you have trouble installing the card, remove the card once and try again. If
you apply excessive pressure on the card, there is a risk of breaking the
card.
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
55