Power Supply Fan; Installation - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.10

Power Supply Fan

In the following configuration of the non-redundant power source, the optional power supply support fan is
required.

When mounting the optional RAID controller

When mounting the optional dustproof bezel

When mounting the option responding to the high-temperature environment
Install the power supply support fan according to the following description.
Note that the power supply support fan varies depending on the type of the RAID controller.

N8181-132 Fixed power supply support fan: N8103-176/177/178/188

N8181-178 Fixed power supply support fan: N8103-205/206/207/208/210/211
1.10.1

Installation

1. See Chapter 2 (1.2 Overview of Installation and Removal) for preparation.
2. Remove the side cover while referring to Chapter 2 (1.3 Removing the Side Cover).
3. Remove the duct.
4. Install the Power Supply Fan to the front of the power supply, and fix it by using attached one screw.
N8181-132F Power Supply Fan
58
Fix it with the
screw (one piece).
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
Fix it with the screw
(two pieces).
N8181-178F Power Supply Fan