Rear View - NEC Express5800 Series User Manual

Chapter 1 General Description
4.2

Rear View

<Non-redundant power supply model>
5 4
9
6
8
10
10 9
7
2
1 AC Inlet
Sockets for connecting power cords.
2 PCI Slots
Slots for installing PCI cards.
3 Chassis Lock Tab
A tab for locking the side cover.
4 Serial Port (COM A) Connector
A connector for connecting serial interface devices.
This cannot directly connect to a network line. If the
optional N8117-01A Additional RS232C Connector Kit is
connected, the connector of N8117-01A is assigned as the
serial port B.
5 Display Connector
A connector for connecting a display
<Redundant power supply model>
5
1
3
6
8
10 9
6 USB Connectors
Connectors for connecting USB3.0 interface devices.
7 LAN Connectors
Connectors for connecting to a network
(1000BASE-T/100BASE-TX /10BASE-T).
If Shared BMC LAN feature is enabled in ROM Utility, LAN1
connector can also be used as the management LAN
connector. Sharing port is not recommended from the point
of performance and security.
8 Management LAN Connector
A LAN connector (1000BASE-T/100BASE-TX /10BASE-T)
for connecting EXPRESSSCOPE Engine 3. This connector
cannot be used as a normal LAN port. This port cannot be
used when Shared BMC LAN feature is used.
9 LINK/ACT LED (green)
LEDs for showing the access status of LAN
10 SPEED LED (green/amber)
LEDs for showing the transfer speed of LAN ports
Express5800/T110i User's Guide
4. Names and Functions of Parts
4
9
10
7
2
1
3
23