Top Control - Sanyo PLV-Z2000 Owner's Manual

Part Names and Functions

Top Control

POWER indicator
Lights red while the projector is in stand-by mode.
–
– Lights green during operations.
– Blinks red during the cooling-off period.
– Blinks green in the Power management mode (p.41).
– Blinks orange when the automatic slide shutter is
closed during operations (p.53).
WARNING indicator
Lights red light when the projector detects an abnormal
–
condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.44, 53).
LAMP REPLACE indicator
Lights yellow light when the projection lamp reaches its
end of life (pp.49, 53).
MENU button
Open or close the On-Screen Menu (p.20).
10
INPUT button
Select an input source (p.24).
POINT buttons
Select an item or adjust the setting values in the On-
Screen Menu.
OK button
Execute the item selected or use it to access the
submenu items (p.20).
INFO. button
Display the input source information (p.43).
POWER ON/STAND-BY button
Turn the projector on or off (pp.18, 19).