Picture Adjustment; Picture Position And Screen Adjustment - Sanyo PLV-Z2000 Owner's Manual

Picture Adjustment

Picture Position and Screen Adjustment

Some input source employ special signal formats which may not be tuned by the auto-tuning system of this projector.
Picture Adjustment enables you to precisely adjust several parameters manually to match those signal formats. The
parameters manually adjusted is stored for every input.
Press the Point
1
and press the Point
items.
Use the Point
2
press the Point
item. The adjustment bar is displayed.
Use the Point
3
press the OK button.
Overscan
Use the Point buttons to adjust the overscan area. It works
only to decrease the overscanned portion of the screen (from 0 to
+10).
Horizontal
Use the Point buttons to adjust the horizontal picture position
(from -100 to +100).
Vertical
Use the Point buttons to adjust the vertical picture position
(from -100 to +100).
Auto adj.
When the input signal is from computers, select Auto adj. and
press the Point or OK buttons so that it automatically adjust Fine
sync, Total dots, and Horizontal and Vertical positions to conform to
your computer.
Fine sync
Use the Point buttons to adjust the value, eliminating a flicker
from the image displayed (from 0 to +31).
Total dots
Use the Point buttons to adjust the number of total dots in
one horizontal period to match your PC image (from -100 to +100).
Note:
• Overscan can be selected with the video input only.
• When the digital signal is selected and the image noise appears
on the edge of the screen, use the Overscan to make adjustment.
• The adjusting range for the Horizontal and Vertical positions, and
Total dots differs depending on the input signal. When the video
signal format is 480i or 575i, the adjusting range for the Horizontal
position will be from -8 to +8.
• The Auto adj. function cannot be operated with the video input,
some incompatible computer input and digital signals.
• Fine sync andTotal dots cannot be operated when the video signal
format is 480i or 575i and with some incompatible computer input
and digital signals.
• The Picture adj. Menu cannot be operated without an input signal.
• When the adjustment exceeds the signal range of Horizontal, the
projected image may be distorted.
34
buttons to select the Picture adj. Menu
or OK buttons to access the submenu
buttons to select the desired item and
or OK buttons to access the selected
buttons to adjust the setting values and
Picture adj. Menu
The selected item.
Press the Point
buttons to access the
selected item. The adjust-
ment bar is displayed.
Use the Point
to adjust the setting
values and press the OK
button to return to the
submenu.
If you press the Point
button, the next item can
be selected.
or OK
buttons