Top Control - Sanyo PLC-XD2200 Owner's Manual

Part Names and Functions
① SELECT button
– E xecute the selected item (p.21).
– E xpand or compress the image in the Digital
zoom mode (p.35).
② POINT ▲▼◄► (VOLUME +/–) buttons
– S elect an item or adjust the value in the
On-Screen Menu (p.21).
– P an the image in the Digital zoom +/- mode
(p.35).
– A djust the volume level (Point ◄►buttons)
(p.24).
③ AUTO SETUP button
Execute the setting of Auto setup (includes Input Execute the setting of Auto setup (includes Input
search, Auto PC adj. and Auto Keystone functions)
in the setting menu. (pp.23, 44).
④ ON/STAND–By button
Turn the projector on or off (pp.18-20).
10
Downloaded From projector-manual.com Sanyo Manuals

Top Control

⑧
⑦
⑥
(pp.23, 44).
⑤
④
③
②
①
⑤ POwER indicator
– L ights red when the projector is in stand-by mode.
– L ights green during operations.
– B links green in the Power management mode
(p.50).
⑥ MENU button
Open or close the On-Screen Menu (p.21).
⑦ LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.62, 70).
⑧ wARNING indicator
– L ights red when the projector detects an
abnormal condition.
– B links red when the internal temperature of the
projector exceeds the operating range (pp.59,
70).