Top Control - Sanyo PLC-WXU700 Owner's Manual

Top Control

① SELECT button
– E xecute the selected item (p.24).
– E xpand or compress the image in the Digital zoom
mode (p.39).
② POINT
▲▼◄►
(VOLUME +/–) buttons
– S elect an item or adjust the value in the On-Screen
Menu (p.24).
– P an the image in the Digital zoom + mode (p.39).
– A djust the volume level (Point
③ MENU button
Open or close the On-Screen Menu (p.24).
④ AUTO SETUP/CANCEL button
–Correct vertical keystone distortion and adjust
computer display parameters such as Fine sync,
Total dots, Horizontal and Vertical position
(pp.26, 48).
–Display the image in USB thumb drive or return to
the menu bar in Memory Viewer menu.
Refer to the owner's manual of "Memory
Viewer function".
⑤ POWER indicator
– L ights red when the projector is in stand-by mode.
– L ights green during operations.
– B links green in the Power management mode
(p.56).
⑩
⑨
⑧
⑦
⑥ WARNING indicator
⑦ KEySTONE button
buttons) (p.27).
◄►
⑧ INPUT button
⑨ ON/STAND–By button
⑩ LAMP REPLACE indicator
Part Names and Functions
⑥
⑤
④
③
②
①
– L ights red when the projector detects an abnormal
condition.
– B links red when the internal temperature of the
projector exceeds the operating range (pp.64, 75).
Correct keystone distortion (pp.26, 49).
Select an input source (pp.30-31, 40-41).
Turn the projector on or off (pp.21-23).
Lights yellow when the projection lamp reaches its
end of life (pp.67, 75).
11