Resetting The Filter Counter; Cleaning The Projection Lens; Cleaning The Projector Cabinet - Sanyo PLV-Z2000 Owner's Manual

Maintenance and Cleaning

Resetting the Filter Counter

Be sure to reset the Filter counter after cleaning or replacing the air filter.
Turn the projector on and press the MENU button to display
1
the On-Screen Menu. Select the Setting Menu with the Point
buttons. Press the Point
submenu items.
2 Select Filter counter and then use the Point
select [Reset] and press the OK button. "Filter counter
reset?" appears. Select [Yes] and then press the OK button.
Another confirmation dialog box appears, and select [Yes] to
3
reset the Filter counter.
Note:
• Do not reset the Filter counter without cleaning or replacing the
air filter. Be sure to reset the Filter counter only after cleaning or
replacing the air filter.

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that contains
a small amount of non-abrasive camera lens cleaner, or use a
lens cleaning paper or a commercially available air blower to clean
the lens. Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch the
surface of the lens.
When the projector is not in use, make sure that the automatic
slide shutter is closed.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.
Gently wipe the projector body with a dry soft cloth. When the
cabinet is heavily soiled, apply a small amount of mild detergent
and finish with a dry soft cloth. Avoid using an excessive amount
of cleaner. Abrasive cleaners, solvents, or other harsh chemicals
might scratch the surface of the cabinet.
When the projector is not in use, put it in an appropriate carrying
case to protect it from dust and scratches.
48
or OK buttons to access the
button to
Filter counter
Select Filter counter and
use the Point
select [Reset] and press
the OK button. "Filter
counter reset?" appears.
Select [Yes] and press
the OK button, then
another confirmation
box appears.
Select [Yes] again to
reset the lamp counter.
button to