Sanyo PLV-Z2000 Owner's Manual page 38

HDMI 1 setup/ HDMI 2 setup
Select Normal or Enhanced according to the output signal of video
equipment. Press the Point
each option.
Normal . . . . When the output of video equipment is set to
"STANDARD. "
Enhanced . . When the output of video equipment is set to
"ENHANCED. "
The names for the output setting of video equipment vary from
equipment to equipment. For details, refer to the owner's manual
of video equipment.
Background
Select the background screen for when no input signal is detected.
Press the Point or OK buttons to switch between each option.
Blue . . . . Project a blue background
Logo . . . . Project an image selected in the Logo setting.
Black. . . . Project a black background
Note:
• When the Logo setting (see page 40) is set to "Off" with the
"Logo" background, the Background setting will be switched to
"Blue. "
38
or OK buttons to switch between
HDMI 1 setup
Press the Point
buttons to select Normal
or Enhanced according to
the output signal of video
equipment.
Background
Setting
or OK