Sanyo PLV-Z2000 Owner's Manual page 25

Menu Operation
Use the Point buttons to select the Input Menu and
1
press the Point or OK buttons to access the submenu
items.
Use the Point buttons to select an input source and
2
press the Point or OK buttons. The selected item is check
marked.
When "Video" or "S-video" is selected, press the Point
3
button to display the System Menu.
Use the Point buttons to select the desired system and
4
press the OK or Point
When "Computer" is selected, press the Point
5
display the Source Select Menu.
Use the Point buttons to select the desired source and
6
press the OK or Point
Video or S-Video
When the video signal is connected to the VIDEO or S-VIDEO
jacks, select Video or S-video respectively.
Auto
The projector automatically detects the incoming video system
and adjusts itself to optimize its performance.
When the video system is PAL -M or PAL -N, select the system
manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce a proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL -M, and PAL -N.
Component 1 or Component 2
When the video signal is connected to the Y-Pb/Cb-Pr/Cr jacks,
select Component 1 or Component 2.
The projector automatically detects the incoming video signal and
adjusts itself to optimize its performance.
buttons.
button to
buttons.
Input Menu
The currently set item
is check marked.
Press the Point
Video
to display the System
Input
Menu.
System Menu (Video/S-Video)
Use the Point
to select the desired
system and press the OK
or Point
Quit
Exit this menu.
Input
button
buttons
buttons.
25