Table of Contents
Advertisement
Top Control
q WARNING TEMP. indicator
Blinks red when the internal temperature of the
projector exceeds the operating range (pp.67, 73).
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.65, 74).
e ON/STAND-BY button
Turn the projector on or off (pp.25–26).
r INPUT button
Select an input source (pp.34–35).
t LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.29).
y POINT
ed7 8
(VOLUME +/–) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.27).
– Pan the image in Digital zoom + mode (p.51).
– Adjust the volume level (Point
(p.30).
q
w
e
r
t
y
u
u SELECT button
i WARNING FILTER indicator
o LAMP indicator
!0 POWER indicator
!1 INFO. button
!2 MENU button
7 8
buttons)
✔
Part Names and Functions
i
o
!0
!1
!2
– Execute the selected item (p.27).
– Expand or compress the image in the Digital zoom
mode (p.51).
– Blinks orange indicating the filter needs cleaning.
– Lights orange when clogging of the filter is
detected, urging immediate cleaning.
Lights red during operations.
– Lights when in stand-by mode and during
operations.
– Blinks during the cooling-off period.
– Blinks in the Power management mode (p.58).
Display the input source information (p.29).
Open or close the On-Screen Menu (p.27).
Note:
•All five indicators on the top control blinks when the
projector detects an abnormal condition.
13
Advertisement
Table of Contents
