Top Control - Sanyo PLC-XU4000 Owner's Manual

Part Names and Functions
① SELECT button
– Execute the selected item (p.21).
– Expand or compress the image in the Digital zoom
mode (p.36).
② POINT
▲▼◄►
– Select an item or adjust the value in the On-Screen
Menu (p.21).
– Pan the image in the Digital zoom +/- mode (p.36).
– A djust the volume level (Point ◄► buttons) (p.24).
③ INPUT button
Select an input source (pp.27-28, 38-39).
④ ON/STAND–By button
Turn the projector on or off (pp.18-20).
⑤ POwER indicator
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Blinks green in the Power management mode
(p.51).
⑥ MENU button
Open or close the On-Screen Menu (p.21).
10
Downloaded From projector-manual.com Sanyo Manuals
⑨
⑧
⑦
⑥
(VOLUME – /+) buttons

Top Control

⑤
④
③
②
①
⑦ AUTO SETUP button
Execute the setting of Auto setup (includes Input
search, Auto PC adj. and Auto Keystone functions)
in the setting menu. (pp.23, 47).
⑧ wARNING indicator
– Lights red when the projector detects an abnormal
condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.60, 70).
⑨ LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.63, 70).