Table of Contents
Advertisement
Top Control
q WARNING TEMP . indicator
Blinks red when the internal temperature of the
projector exceeds the operating range (pp.61, 68).
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.59, 69).
e ON/STAND-By button
Turn the projector on or off (pp.24–25).
r INPUT button
Select an input source (pp.34–35).
t LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.30).
ed7 8
(VOLUME +/–) buttons
y POINT
– Select an item or adjust the value in the On-
Screen Menu (p.26).
– Pan the image in Digital zoom + mode (p.47).
– Adjust the volume level (Point
(p.29).
q
w
e
r
t
y
u
u SELECT button
i WARNING FILTER indicator
o LAMP indicator
!0 POWER indicator
!1 INFO . button
7 8
buttons)
!2 MENU button
✔
Part Names and Functions
i
o
!0
!1
!2
– Execute the selected item (p.26).
– Expand or compress the image in the Digital zoom
mode (p.47).
– Blinks orange indicating the filter needs cleaning.
– Lights orange when clogging of the filter is
detected, urging immediate cleaning.
Lights red during operations.
– Lights when in stand-by mode and during
operations.
– Blinks during the cooling-off period.
– Blinks in the Power management mode (p.53).
Display the input source information (p.28).
Open or close the On-Screen Menu (p.26).
Note:
• All five indicators on the top control blinks when the
projector detects an abnormal condition.
13
Advertisement
Table of Contents
