Creating Lte Wan Connection - D-Link DIR-825 User Manual

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual

Creating LTE WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct
operation of the mobile WAN connection click the ENTER PIN button in the notification in the top
right corner of the page and enter the PIN code
creation page, in the General Settings section, select the relevant value from the Connection
type drop-down list and specify the needed values.
Figure 85. The page for creating a new LTE connection. The General Settings section.
Parameter
Interface
Connection name
Enable connection
11 Some models of USB modems do not support disabling the PIN code check on the SIM card through the web-based
interface of the router.
11 on the page displayed. Then on the connection
General Settings
A physical or virtual WAN interface to which the new connection
will be assigned.
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Page 109 of 249
Configuring via Web-based Interface
Description