Installation; Protective Flap, Welding Machine Control - EWM tigSpeed continuous drive 45 hotwire Operating Instructions Manual

Design and function

Installation

5.5 Installation
Risk of accident due to improper transport of machines that may not be lifted!
Do not lift or suspend the machine! The machine can fall down and cause injuries! The
handles and brackets are suitable for transport by hand only!
•
The machine may not be lifted by crane or suspended!
•
Depending on machine type, equipment for lifting by crane or use while suspended is
available as a retrofitting option - See 9 Accessories chapter.
Installation site!
The machine must not be operated in the open air and must only be set up and
operated on a suitable, stable and level base!
•
The operator must ensure that the ground is non-slip and level, and provide sufficient
lighting for the place of work.
•
Safe operation of the machine must be guaranteed at all times.
5.5.1

Protective flap, welding machine control

Item Symbol
1
2
3
•
Push the right-hand bracket of the protective cap to the right and remove the protective cap.
28
Description 0
Protective cap
Lid
Bracket, protective cap
WARNING
CAUTION
Figure 5-4
099-000236-EW501
21.10.2015