Connecting To A Computer - Sanyo PLC-XE40 Owner's Manual

Installation

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
•USB Cable
• Audio Cables (Mini Plug: stereo)
(Not all the cables are suppled with this projector.)
Audio Output
Audio cable
(stereo)
✔
Note:
• Input sound to the COMPUTER / COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1 / COMPONENT IN and
the COMPUTER IN 2/MONITOR OUT terminal as input.
• When connecting the AUDIO OUT to external audio equipment,
the projector's built-in speaker is disconnected.
• When the cable is of the longer variety, it is advisable to use the
COMPUTER IN 1 / COMPONENT IN and not the COMPUTER IN
2 / MONITOR OUT.
• See p. 65 for ordering optional parts.
16
USB port Monitor Output
USB cable VGA cable
COMPUTER IN 1/
USB
COMPONENT IN
USB SERVICE PORT COMPUTER IN 1
RESET
/ COMPONENT IN
COMPUTER/
COMPONENT
AUDIO IN
ON ON
Monitor Output
or
Monitor Input
VGA cable
COMPUTER IN 2/
MONITOR OUT
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See p. 45.)
(VARIABLE)
AUDIO OUT
R
COMPUTER IN 2 /
MONITOR OUT
COMPUTER /
L
VIDEO IN
COMPONENT
(MONO)
S-VIDEO IN
AUDIO IN
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting the
cables.
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)