Sanyo PLC-XE40 Owner's Manual page 48

Setting
To Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point
press the SELECT button to display the New PIN code
input dialog box.
Select a number with the Point
number with the SELECT button. Repeat it to complete
entering a four-digit number. When the four-digit
number is fixed, the pointer automatically moves to
"Set". Then press the SELECT button.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, TAKE
A MEMO AND KEEP IT SECURELY. IF YOU FORGET
YOUR PIN CODE, THE PROJECTOR CAN NO
LONGER BE STARTED.
Alarm
Make some settings for the Antitheft alarm function.
(pp. 50-52)
Press the SELECT button at Alarm icon to display the
Alarm setting box.
When the Antitheft alarm function is set, "On" is
displayed. When the function is released, "Off" is
displayed. See p. 50 to set or release this function.
Select Alarm volume, Sensitivity or Ringing time with
the Point buttons, and set each item with the Point
ed
buttons.
7 8
Alarm volume
Small
Medium
Large
Sensitivity
Low ..................Less sensitive
Medium ...........Normal sensitivity
High .................Highly sensitive (default setting)
Ringing time
10 seconds ......Default setting.
60 seconds ......Ring about 60 seconds.
Long time.........Ring until the end of the battery life.
48
d
buttons and fix the
7 8
Ring about 10 seconds.
Change the PIN code lock setting
button, and
Change the PIN code
Alarm
✔
Note:
• The Alarm icon becomes gray and cannot be
selected when the Antitheft alarm function is
"On", a battery is not installed, or the battery is
coming to the end of its life.
• While the Alarm icon is selected, the Antitheft
alarm setting buttons on the side panel cannot
be operated.
• When selecting "Long time" in Ringing time, the
length of alarm ringing time differs depending on
the battery life.
Select a desired
setting with the
Point 7 8
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
The entered numbers are
displayed for confirmation.
When Antitheft alarm is
"On", the battery is not
installed or coming to the
end or its life, Alarm icon
becomes gray and cannot
be selected.
Press the SELECT button at the Alarm
icon to display the Alarm setting box.
Set Sensitivity or
Ringing time with
the Point
buttons.
buttons.
7 8