How To Operate The On-Screen Menu - Sanyo PLC-XE40 Owner's Manual

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedure.
1 Press the MENU button to display the On-Screen
Menu.
2 Press the Point
7 8
Press the Point ed buttons to select an item.
3
Press the SELECT button to show the item data. To
adjust the data, press the Point
the following pages for each adjustment.
To close the On-Screen Menu, press the MENU
button again .
✔
Note:
• The selected item is not active until the SELECT button is pressed.
buttons to select a Menu icon.
buttons. Refer to
7 8
Remote Control
SELECT button
On-Screen Menu
Menu bar
Pointer (red framed )
Press the Point ed
buttons to move the
pointer.
Item
SELECT
button
Item data
Press the Point 7 8
buttons to adjust
the value.
Quit
Exit this menu.
Basic Operation
MENU button
POINT buttons
Menu icon
Pointer
(red framed )
21