Sanyo PLC-XE40 Owner's Manual page 51

Settings
Change the PIN code
Press the F button and enter the four-digit PIN code
1
within about 10 seconds. The ALARM indicator blinks
red for a few seconds and high-pitched confirmation
sound is made.
2 While the indicator is blinking, enter new PIN code
then you will hear the high-pitched confirmation sound
and the ALARM indicator is off.
When typing an incorrect PIN code, you will hear low-
pitched sound. If you enter incorrect PIN codes 3
times, the alarm starts ringing.
A PIN code for Antitheft alarm function is the
combination of 1, 2, or 3. Enter the PIN code with the
button 1, 2, and 3. The default PIN code is set as
"1111".
Reset the settings
Select Factory default in the Setting menu to reset the
settings for the Antitheft alarm function.
✔
Note:
• This is effective only when the Antitheft alarm setting is released.
• You can make some more detailed settings. (p. 48)
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE AND KEEP IT SECURELY.
IF YOU FORGET YOUR PIN CODE, SOME SETTINGS OF
THE ALARM FUNCTION CAN NO LONGER BE
CHANGED.
Antitheft Alarm Function
Side Control
F button button 1, 2, 3
ALARM
indicator
51