Connecting To Component Video Equipment - Sanyo PLC-XE40 Owner's Manual

Installation

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables (Mini Plug :stereo)
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Not all the cables are suppled with this projector.)
Audio Output
Audio cable
(stereo)
USB
RESET
✔
Note:
• When connecting AUDIO OUT to external audio equipment, the
projector's built-in speaker is disconnected.
• See p. 65 for ordering optional parts.
Unplug the power cords of both the projector and
external equipment from the AC outlet before connecting
the cables.
18
RGB Scart 21- Component Video Output
pin Output (Y, Pb/Cb, Pr/Cr)
S c a r t - V G A
cable
COMPUTER IN 1/ COMPONENT IN
COMPUTER IN 2 /
COMPUTER IN 1 MONITOR OUT
SERVICE PORT
/ COMPONENT IN
C O M P U T E R /
COMPONENT
AUDIO IN
Component
cable
Component-VGA
cable
(VARIABLE)
AUDIO OUT
AUDIO OUT
R
(stereo)
COMPUTER /
L
VIDEO IN
COMPONENT
(MONO)
S-VIDEO IN
AUDIO IN
External Audio Equipment
Audio Input
Audio cable
(stereo)