Screen Size Adjustment - Sanyo PLC-XE40 Owner's Manual

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the Screen Menu icon.
2 Press the Point ed buttons and move the red framed
pointer to the function that you want to select and
then press the SELECT button.
Normal
Provide the image at a normal video aspect ratio of 4 : 3.
Wide
Provide the image at a wide screen ratio of 16 : 9.
Custom
Adjust the screen scale and position manually.
Press the SELECT button at Custom icon. "Custom" is
displayed on the screen for a few seconds and then
"Aspect" box appears.
Scale H / V .......Adjust the Horizontal / Vertical screen
scale.
H&V..................When selecting "On", the aspect ratio is
fixed. "Scale V" becomes gray and
unselectable. Adjust "Scale H", then the
screen scale is automatically modified
based on the aspect ratio.
Position H / V ...Adjust the Horizontal / Vertical screen
position.
Common ........Save the adjusted scale. Press the
SELECT button at "Common" to display
the confirmation box. To save the scale,
press the SELECT button at "Yes".
When "Custom" is selected, the saved
scale is used.
Reset ............Reset "Common" data.
SELECT button at "Reset" to display the
confirmation box. To reset, press the
SELECT button at "Yes".
✔
Note:
• Wide is not available when 720p, 1035i, or 1080i is selected in
the AV System Menu (p. 37).
• When no signal is detected, Normal is set automatically and
"Aspect" screen disappears.
• The adjustable range of Scale H/V and Position H/V can be limited
depending on the input signal.
buttons to move the red
7 8
Press the
Screen Menu
Move the red framed pointer to a
function and press the SELECT
button.
Press the SELECT button at
"Common" or "Reset", to
display the confirmation box.
Video Input
Screen Menu icon
41