Focus Adjustment; Keystone Correction - Sanyo PLC-XE40 Owner's Manual

Focus Adjustment

Adjust lens focus with the Focus lever.

Keystone Correction

If a projected picture has keystone distortion, correct the
image with Keystone adjustment.
Press the KEYSTONE button on the remote control. The
keystone dialog box appears.
Correct keystone distortion by pressing the Point
buttons. Keystone adjustment can be memorized. (p. 42)
Reduce the upper width
with the Point e button.
ed
Reduce the lower width
with the Point d button.
Focus Lever
• The arrows are white when there is no correction.
• The direction of the arrow which are being corrected
turns red.
• The arrows disappear at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment is canceled.
• The adjustable range can be limited depending on the
input signal.
• The projected picture may fluctuate momently
depending on the keystone adjustment.
Remote Control
KEYSTONE button
POINT
Basic Operation
ed
buttons
23