Manual Pc Adjustment - Sanyo PLC-XE40 Owner's Manual

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has 5 independent memory areas to memorize those parameters which are manually adjusted. You
can recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the PC Adjust Menu icon.
2 Press the Point ed
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box. Press the Point
value.
Fine sync
Cut out flicker from the image displayed. Press the Point
buttons to adjust the value. (From 0 to 31)
8
Total dots
Adjust the number of total dots in one horizontal period.
Press the Point buttons to adjust number to match your
7 8
PC image.
Horizontal
Press the Point buttons to adjust the horizontal picture
7 8
position.
Vertical
Press the Point buttons to adjust the vertical picture
7 8
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Adjust clamp level. When the image has dark bars, try this
adjustment.
buttons to move the red
7 8
buttons to move the red framed
buttons to adjust the
7 8
PC Adjust Menu
Move the red framed
pointer to an item and
press the SELECT button.
7
Selected Mode
Press the SELECT button
at this item to adjust other
items.
Press the SELECT button at
"Current mode" to show the
information of the connected
computer.
Computer Input
PC Adjust Menu icon
Status (Stored / Free) of the
selected Mode.
Press the Point 7 8 buttons
to adjust the value.
29