Video System Selection - Sanyo PLC-XE40 Owner's Manual

Video System Selection

1
Press the MENU button to display the On-Screen
Menu. Press the Point
framed pointer to the AV System Menu icon.
2 Press the Point ed
pointer to the system that you want to select and then
press the SELECT button.
Video or S-Video
Auto
The projector automatically detects incoming video system,
and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format
among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-
N.
Component
Auto
The projector automatically detects incoming video signal,
and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce a proper video image, it is
necessary to select a specific component video signal
format among 480i, 575i, 480p, 575p, 720p, 1035i, and
1080i.
✔
Note:
• The AV System Menu cannot be selected when selecting
RGB(Scart).
buttons to move the red
7 8
buttons to move the red arrow
AV System Menu (Video or S-Video)
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
AV System Menu (Component)
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
Video Input
37