Introduction - C-COM Satellite Systems iNetVu 7710 User Manual

C-COM Satellite Systems Inc.

1. Introduction

®
The iNetVu 7710 Controller is a one-box, one-touch solution for satellite auto-acquisition.
Designed to interface with several Satellite Modems, iNetVu
®
Receivers, the iNetVu
7720 on-board module (Remote Controller). The 7710 will only work with the remote on-board
7720 Drive Module and the same holds true for the 7720. The iNetVu
configurable and operated antenna controller unit which comes with the combined
GPS/GLONASS Satellite Navigation System.
®
The iNetVu 7710 Controllers are fully functional and configurable straight out of the box solution.
No PC or monitor required. A DVB-S2ACM/CCM Tuner, an onboard LCD displaying real-time
system status, and a Keypad Navigator, makes it easy to use the iNetVu
simply configuring the controller right from the front panel.
®
The iNetVu 7710 Controllers along with any iNetVu
alone unit. No modem or RF splitters are required for satellite acquisition. The LNB can be
powered straight from the controller.
The 7710 (central controller) with the 7720 (remote drive module) complement the iNetVu
Generation systems allowing movement on three axis simultaneously improving satellite
acquisition speed and accuracy.
7710 Controller connects to iNetVu
Fig. 1: iNetVu
Fig. 2: iNetVu
iNetVu™ 7710 Controller User Manual
®
VSATs, and DVB-S/DVB-S2ACM
®
platforms which are equipped with
®
7710 Controller is easily
® 7710 Controller
®
7720 Controller
®
platform can work as a complete stand-
9
®
7710 Controller by
®
New