Table of Contents
Advertisement
C-COM Satellite Systems Inc.
5. Typical Connection Configuration
The typical connection configuration for each service will be the same regardless of the Satellite
Modem / VSAT. However, the configuration parameters for Satellite Modem / VSAT
Communication will differ depending on service. See iNetVu
procedures corresponding to the service used.
This situation or practice may result in property or
equipment damage. Ensure Power/Data cable is
connected prior to powering on 7710 Controller. Do
not connect or disconnect cables once controller has
been powered on. It is recommended that the
controller is properly grounded at all times. 7720
Remote Drive Module acquires its power when the
7710 controller is powered up.
iNetVu™ 7710 Controller User Manual
®
System Manual for configuration
12
Advertisement
Table of Contents
Need help?
Do you have a question about the iNetVu 7710 and is the answer not in the manual?
Questions and answers