Control Panel Functions; Figure 10 Control Panel Layout - Toshiba T1000 Series Installation And Operation Manual

(a). Press and hold the
Each content can be displayed by pressing at once, and it has fourteen kinds of
functions to be checked.
(b). After choosing the function, push the
(c). Push the
(d). Push the button to enable your function.
(e). Push the button to confirm and enable your function.
(f). If not pressed within 10 seconds, it will return to original status.
14.3

CONTROL PANEL FUNCTIONS

Operation of the UPS is indicated on the monitor panel with five LED indicators and an
LCD screen. This display is also capable of alerting the user with audible alarms.
ON/
ON-LINE/
voltage at the output terminals and this LED will light up in green.
ON-BAT/
BYPASS/
FAULT/
red and sound an audible alarm. Press any of the buttons on the front panel to
the alarm.
Status of the UPS, measurements and alarms are all displayed on the LCD screen.
Tower
T1000 Series UPS 1000-3000VA Installation and Operation Manual – 94086-001
button (at least 2 seconds) to choose the function you want.
button to choose other function again.
This green LED is lit when UPS has been turned on.
When the UPS is in normal or static bypass modes, there is
While operating in battery mode.
While operating in bypass mode, this LED will light up in yellow.
If any internal error occurs in the UPS, this LED will light up in

Figure 10 Control Panel Layout

button to enter the function that you want.
Rackmount
turn off
31