Toshiba T1000 Series Installation And Operation Manual page 42

Normal display
The UPS status is shown in normal display mode. From here you have a choice to go to
UPS Meters display or the Setting display by pushing the button.
UPS Meters display
Various measurements are available through the UPS Meters display; pressing the button
will scroll through the following Meters:
LCD message
O/P VOLT= xxx. xV
O/P FREQ= xx. x Hz
I/P VOL T= xxx. xV
I/P FREQ= xx. x Hz
BAT VOLT= xx. xV
O/P LOAD%= xx%
O/P W= xW
O/P VA= xVA
O/P CURR= xA
BACKUP TIME= xx min Shows Estimated Backup time in minutes
BAT CHARG= xx%
TEMPERATURE= xxC
BAT PACK NUM= x
RATING = xxxxVA
CPU VERSION xx.x
UPS Configurations

Various settings that have been chosen are shown in the UPS setting display.
 To enter configuration mode, press and hold the
first configuration parameter will be shown on the LCD display.

Press the

Press the

Press the
Press the
You may be prompted to save the selection, if so press the
save your selection. Other options are saved and started automatically. See the table
below for further details.

If no buttons are pressed (or user inactivity) for ten seconds, the UPS exits the
configuration mode and returns to normal mode displaying Line mode.
While the factory default settings do not necessarily have to be changed, the user is free to
tailor the UPS to their specific needs.
T1000 Series UPS 1000-3000VA Installation and Operation Manual – 94086-001
Table 3 Meters Display Options
Description
Shows Output AC voltage
Shows Output Frequency
Shows Input AC voltage
Shows Input Frequency
Shows Battery Voltage
Shows Load % of max load
Shows Output Watts
Shows Output VA
Shows Output Current
Shows approximate percentage of Battery capacity
Shows approximate ambient temperature
Shows External Battery Pack Number
Shows UPS Rating
Shows CPU Version
button to scroll through the parameters.
button to select the parameter.
button to scroll through the options for the selected parameter;
button to select the option.
button for one second. The
button to either confirm or
32