Table of Contents
Advertisement
WARNING
To reduce risk of fire, replace only with the same type and rating of fuse.
To reduce risk of electric shock, disconnect the UPS from the mains supply before
installing a computer interface signal cable. Reconnect the power cord only after signaling
interconnections have been made.
Servicing of batteries should be performed or supervised by personnel with knowledge of
batteries and the required precautions. Keep unauthorized personnel away from batteries.
The instructions contained within this safety manual are deemed important and should be
closely followed at all times during installation and follow-up maintenance of the UPS and
batteries.
CAUTION
The unit has a dangerous amount of voltage. If the UPS indicator is on, the unit's
outlets may have a dangerous amount of voltage even when not plugged into the
wall outlet because the battery may continue to supply power.
Ensure installation is indoors, free from electrically-conductive particles,
temperature and humidity controlled in order to reduce the risk of electric shock.
It is best to disconnect the device using the power supply cord. Ensure that the
equipment is placed in a position near the outlet where easily accessible. Except
when replacing the batteries, all service on this equipment must be carried out by
qualified service personnel. Before conducting any maintenance, repair or
shipment, first ensure that all components turned off completely and
disconnected.
T1000 Series UPS 1000-3000VA Installation and Operation Manual – 94086-001
8
Hide quick links:
Advertisement
Table of Contents
