7
Calibration
7.1
Result calibration
Enter the main menu, choose "Function" and choose "Result Correct". Use the "Up" or
-
"Down" key to set your desired value. Confirm your setting using the "Enter"-key.
Hit "Esc"-key to return to the main menu.
-
7.2
Stylus correct
Enter the main menu and select "Stylus Correct". Choose "Yes" or "No" in order to
-
perform a correction of the stylus and confirm your choice using the "Enter"-key. The
correction is performed when "Yes" is chosen and the device will then display the
main screen again.
© PCE Instruments
12