6.2.4
Stylus Position
Go to the main menu and then choose the submenu "Function" and select the point
-
"Stylus Position". Set the desired position. When this is done hit the "Esc"-key to
return to the level above.
6.2.5
Automatic shutdown
Enter the main menu, select "Function" and go to the point "Time close".
-
-
The automatic shutdown can be selected. The user can either deactivate the
automatic shutdown or set the automatic shutdown to 1 minute, 3 minutes, 5 minutes,
10 minutes or 30 minutes.
Confirm your choice using the "Enter"-key.
-
Use the "Esc"-key to return to the main menu.
-
6.2.6
Restore factory settings
-
In order to avoid wrong operation and deleting test data that shall not be deleted, the
device double checks and asks for confirmation.
Enter the main menu, go to ""Function" and go to the point "Reset default"
-
Hit the "Esc"-key to return to the higher level.
-
By hitting the "Left"-key you can choose the YES button. Confirm your choice by
-
hitting the "Enter"-key. hit "Left"-key to choose the "No" button and confirm your
choice by pressing the "Enter"-key. The memory will be cleared and no records will be
left on the storage. The device will change to the main screen.
© PCE Instruments
10