Further Functions - PCE Health and Fitness PCE-RT 1200 User Manual

6.2

Further functions

6.2.1 Data management
When the instrument shows the main screen, hit "Menu"-key to enter main menu. Choose the
submenu "Data". If this is done the display shows the data management. Use the "Up" or
"Down" keys to either choose "Test Data" or "Clear Data" and confirm your choice by hitting the
"Enter"-key. The point "Test Data" shows the gathered measurement data. "Clear Data" will
delete all measurement data.
6.2.2 Check measurement data
The measurement data can be observed in two different ways:
Main screen → Main menu → data management submenu →single record all
-
parameters submenu
Main screen → single record all parameters submenu (see image above)
-
6.2.3 Original and filter curve
In order to select the measurements choose the desired set of data and hit "Enter".
-
Use the "UP" and "DOWN" key to change the curve magnification. Magnification can
-
be set to: 1x, 2x, 3x, 4x, 5x, 10x, 20x, 30x, 40x and 50x. The user can view the curve
which is demanded. By using the "right" or "Left" key the next graph can be selected.
The magnification is default 1x.
Use "Up" or "Down" key to show the sampling lengths and the evaluation length.
-
Use "Esc"-key to return to the level above.
-
© PCE Instruments
9