Summary of Contents for PCE Health and Fitness PCE-RT 2200
Page 1
User Manual PCE-RT 1200 / PCE-RT 2000 / PCE-RT 2200 Roughness Tester User manuals in various languages (français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com Last change: 21 December 2020 v1.2...
Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
Specifications Technical specifications of the PCE-RT 1200 2.1.1 Sensor Testing principle Inductance Type 200 μm Measurement Range 5 μm Stylus tip radius Stylus tip material Diamond Maximum recommended static measuring 4 mN (0.4 gf) force Conical stylus with spherical tip angle 90 °...
Technical specifications of the PCE-RT 2000 2.2.1 Sensor Testing principle Inductance Type 200 μm Measurement Range 5 μm Stylus tip radius Stylus tip material Diamond Maximum recommended static measuring 4 mN (0.4 gf) force Conical stylus with spherical tip angle 90 °...
Technical specifications of the PCE-RT 2200 2.3.1 Sensor Testing principle Inductance Type 200 μm Measurement Range 5 μm Stylus tip radius Stylus tip material Diamond Maximum recommended static measuring 4 mN (0.4 gf) force Conical stylus with spherical tip angle 90 °...
2.3.4 Scope of delivery Article Amount Roughness tester Stylus tip Protection for stylus tip Mounting device Calibration plate Roughness standard USB-cable Charging adaptor Carrying case Mounting screws User manual The PC software can be downloaded here: https://www.pce-instruments.com/english/download-win_4.htm Optional accessories 2.4.1 Measurement platform Use the measurement platform to easily adjust the position between the instrument and the workpiece to be measured.
Display Record number Result Parameter GAUSS Filter Battery condition Unit Multiplied overall evaluation length Sampling length Function keys Name Function “Start” key Measurement will start “Esc” key The menu will return to the upper level “Up” key Cursor moves up “Left”...
Getting started Power supply 5.1.1 Power on When the device is in standby mode, hit the “Power”-key to start the instrument and enter the main menu. Note: The battery switch has to be set to “ON”. 5.1.2 Power off When the device is switched on, hit the “Power”-key to put the device into standby mode. Note: If the instrument is not used for a longer period of time, please set the battery switch to “OFF”.
The sensor movement must be vertical to the tested surface (figure below) If measurements are not performed the correct way, the sensor and the device may suffer damage. Operation Measurement By hitting the “Start”-key the measurement will start in any menu item. The instrument will measure according to the current operation.
Page 12
6.2.3 Original and filter curve In order to select the measurements choose the desired set of data and hit “Enter”. Use the “UP” and “DOWN” key to change the curve magnification. Magnification can be set to: 1x, 2x, 3x, 4x, 5x, 10x, 20x, 30x, 40x and 50x. The user can view the curve which is demanded.
Page 13
6.2.6 Automatic shutdown Enter the main menu, select “Function” and go to the point “Time close”. The automatic shutdown can be selected. The user can either deactivate the automatic shutdown or set the automatic shutdown to 1 minute, 3 minutes, 5 minutes, 10 minutes or 30 minutes.
Calibration Result calibration Enter the main menu, choose “Function” and choose “Result Correct”. Use the “Up” or “Down” key to set your desired value. Confirm your setting using the “Enter”-key. Hit “Esc”-key to return to the main menu. Stylus correct Enter the main menu and select “Stylus Correct”.
Contact If you have any questions, suggestions or technical problems, please do not hesitate to contact us. You will find the relevant contact information at the end of this user manual. Disposal For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies.
Page 17
PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 SOULTZ-SOUS-FORETS 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel.