Windows Nt - Contec COM-2PD(PCI)H User Manual

5. About Software
(9) Enter the model name of the hardware used (for example, COM-2PD(PCI)H) in the [Containing
text:] field, then click the [Search Now] button.
Be careful not to enter text in the [Search for files or folders named:] (or [Name]) field.
(10) Delete all the files detected by the search.
(11) Delete files from the C:\Contec folder.
(12) Delete ComDrv95.vxd from the \Windows\system folder.

Windows NT

Take the following steps to manually uninstall the driver software.
(1) Delete files from the C:\Contec folder.
(2) Delete ComDrv.sys from the \Winnt\system32\drivers folder.
Installing the API-PAC(W32) API-SIO Driver in the Windows Vista/XP/Server 2003/2000
Environment
(1) Run SETUP.EXE from the API-PAC(W32) CD-ROM or from the file (* hereafter
API-PAC(W32)) downloaded from the Contec's download site to install the API-SIO driver.
(2) Reboot your OS, and the Hardware Wizard will be started.
(3) During the installation, you will be prompted for an INF file. Specify the API-PAC(W32) INF
folder designated for the OS and device type in use.
(4) Run Config.exe to register the board.
[Notes]
If you install API-SIO from the API-PAC(W32) CD-ROM in Windows XP, uncheck [Search
removable media (floppy, CD-ROM...)] at the [Please choose your search and installation
options.] prompt. Leaving the option checked prevents the API-SIO driver from being installed
normally. If you have installed it with that option checked, take the steps for "Uninstalling the
Driver Software" again as described above.
46
COM-2PD(PCI)H, COM-4PD(PCI)H