The Check Method Of The Completion Of Hardware Installation - Contec COM-2PD(PCI)H User Manual

2. Setup
CAUTION
In Windows XP, the Hardware Wizard displays the following alert dialog box when you have
located the INF file. This dialog box appears, only indicating that the relevant driver has not passed
Windows Logo testing, and it can be ignored without developing any problem with the operation of
the board.
In this case, click on the [Continue Anyway] button.
(3) Installation of the "Communication Port" starts next. If prompted for a file by the OS, specify the
location of the setup information (INF) file, as described above.
You have now finished installing the hardware.

The check method of the completion of hardware installation

(1) Select "System" from "Control Panel" and open [Device Manager].
(2) Check that the names of the boards you are using are registered correctly in the [Multifunction
adapters] folder.
(3) Similarly, confirm that the COM ports have been added in the [Ports] folder.
24
* The name of the board
you have just added is
displayed.
- COM-2PD(PCI)H/COM-2PD(PCI)
- COM-4PD(PCI)H
COM-2PD(PCI)H, COM-4PD(PCI)H