Windows Server 2003, Windows XP, Windows 2000
(1) The "Found New Hardware Wizard" will be started.
Select "Install from a list or specific location", then click on the [Next] button.
If you are using Windows NT 4.0, the "Add New Hardware Wizard" is not started.
Go to Step 3 "Initializing the Software".
(2) Specify that folder on the CD-ROM which contains the setup information (INF) file to register the
board.
-
Source folder \PCI\ComDrv
COM-2PD(PCI)H, COM-4PD(PCI)H
* The name of the board
you have just added is
displayed.
- COM-2PD(PCI)H/COM-2PD(PCI)
- COM-4PD(PCI)H
2. Setup
23